Fargo HDP5000, Руководство пользователя

Страница: 13 / 39

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.5)
5
Specifications
The purpose of this section is to provide the User with specific information on the
Regulatory Compliances, Agency Listings, Technical Specifications and Functional
Specifications for the HDP5000 and HDP5000-LC Printers.
Safety Messages (review carefully)
Symbol Critical Instructions for Safety purposes
Danger: Failure to follow these installation guidelines can result in death
or serious injury.
Information that raises potential safety issues is indicated by a
warning symbol (as shown to the left).
•
To prevent personal injury , refer to the following safety
messages before performing an operation preceded by this
symbol.
•
To prevent personal injury , always remove the power cord prior
to performing repair procedures, unless otherwise specified.
Caution: This device is electrostatically sensitive . It may be damaged if
exposed to static electricity discharges.
Information that raises potential electrostatic safety issues is indicated
by a warning symbol (as shown to the left).
•
To prevent equipment or media damage , refer to the following
safety messages before performing an operation preceded by this
symbol.
•
To prevent equipment or media damage , observe all
established Electrostatic Discharge (ESD) procedures while
handling cables in or near the Circuit Board and Printhead
Assemblies.
•
To prevent equipment or media damage , always wear an
appropriate personal grounding device (e.g., a high quality wrist
strap grounded to avoid potential damage).
•
To prevent equipment or media damage , always remove the
Ribbon and Cards from the Printer before making any repairs,
unless otherwise specified.
•
To prevent equipment or media damage , take jewelry off of
fingers and hands, as well as thoroughly clean hands to remove
oil and debris before working on the Printer.
Formatted: Bullets and Numbering