24
Sound selection
Point the mouse on the small ‘triangle’ below the writing
PRESET
, where initially there is the name “
Big Brass
”. Click to view the list
of the 16 sounds already programmed by the manufacturer.
Choose a sound and click the keys on the keyboard to listen to the new timbre. Every time a sound is changed, the values of the
various parameters are updated and displayed automatically.
The arrows “<“ and ”>“ allow you to select the sounds going back and forth.
The number of the sound selected is displayed with the numbers below the small triangle (
). For example, “1/16” means that
the 1st sound of the 16 has been selected.
PRESET section
‘Triangle’
(
) – To select a sound on the list
< >
- To select a sound moving back and forth
Change name
– To assign the name to a new sound; type the new name and then click
Enter.
File
– To save or recall a sound from a folder in the PC
Save Sound
– To save a sound with new parameters in the desired folder
Load Sound
– To recall a sound from a folder in the PC
Save all Sound
- To save the sound block in a folder of the PC
Load all Sound
– To recall the sound block from a folder of the PC
Store to keyb.
– It transfers all the parameters of the sound selected to one of the 16 sound locations (SOUND 201 - 216) of the TK89.
The new sound with the changed parameters stays in the memory even if the instrument turns off.
OSCILLATOR 1 and OSCILLATOR 2 sections:
OSCILLATOR 1
-
To set the parameters of Oscillator number 1
VOLUME
- To adjust the volume of the wave shape of oscillator 1
Wave shape
– To choose among 4 wave shapes: Sinusoidal, Saw tooth, Triangular and
Square
Octave
- To set the sound octaves, -1 for lower pitches or +1, +2 o +3 for higher pitches.
Semitone
- To set the semitone from 0 to +11. For higher or lower semitones, move the
octave and then fix the desired semitone.
AMPLITUDE ENVELOPE
- To set the amplitude envelope parameters.
The parameters are
ATTACK
,
DECAY
,
SUSTAIN
and
RELEASE
.
FILTER
- To set the filter parameters.
The parameters are:
CUT OFF
- To adjust the filter cut frequency
RESONANCE
- To adjust the brightness of the filter
VIBRATO
- To set the depth of the vibrato
FILTER ENVELOPE
- To set the parameters of the filter envelope.
ATTACK
- to set the attack of the filter envelope
DECAY
- to set the decay
SUST.
- to set sustain
RELEASE
- to set release.
OSCILLATOR 2
- To set the parameters of Oscillator number 2.
The parameters of oscillator 1 and 2 have the same names but are set differently. They allow to obtain an infinite number
of combinations.