- 31 -
Mi 2478
I
T
ALIANO
E
NGLISH
F
RANÇAIS
E
SP
AÑOL
P
ORTUGUÊS
D
EUTSCH
3.2 Programming
Installation wizard enables setting user addresses only; all the other parameters can be set proceeding as follows:
- operate the wheel to access the main menu;
- select
“Settings”
(run the unlock procedure)
access sub-menus to set the required parameters following the
indications below.
Intercommunicating. Enter the addresses and the names
of the devices with which the videointercom should
communicate. The names can be modified at a later time by
the user by accessing the “Set-up” menu.
Entrances. Enter the addresses and the names of the
entrances to which the videointercom should connect. The
names can be modified at a later time by the user by accessing
the “Set-up” menu.
Actuations. Enter the addresses and the names of the
devices that can be activated by videointercom. The
names can be modified at a later time by the user by accessing
the “Set-up” menu.
Installation wizard. See section 3.1 at page 30.
Favourite keys. Select the key to be programmed and then
the function to assign.
Unlocking
procedure
Unlocking
procedure
Warning, entering installing
menu you could affect
the correct operations of
the whole system
Press in sequence "One",
"Two" and "One" to
continue
!
.
Exit
Two
One
Back
Show
settings
Show
settings
Advanced
Default
System
Back
Video
Settings
About
Audio
Language
Back
Actuations
Entrances
Intercommunicating
Back
Actuations
Favourite
buttons
Favourite
buttons
Entrances
Installation
wizard
Installation
wizard
Intercommunicating
