FARFISA INTERCOMS FT 105P, Инструкция по установке, программированию и эксплуатации

Страница: 47 / 56

8
FT
105P
208P
P
R
O
G
R
A
M
M
I
N
G
HOW TO ENABLE INCOMING CALLS
Select the desired configuration for each telephone and fill-in the table below.
0 the extension can: - receive internal calls
1 the extension can: - receive internal calls
- answer unanswered calls
2 the extension can: - receive internal calls
- receive external calls
3 the extension can: - receive internal calls
- receive external calls
- answer unanswered calls
Table
Type of service Code Telephones
41 42 43 44 45 46 47 48
Base
Day incoming calls 3333-03 _ _ _ _ _ _ _ _ 33333 333
Night incoming calls 3333-05 _ _ _ _ _ _ _ _ 00000 000
To program:
pick up the handset (dialling tone);
dial the access code 333303 (day) or 333305 (night);
- (only FT105P) – dial 5 digits to program 5 extensions (see Table). Always dial a
number of 5 digits even if extensions are less than 5.
- (only FT208P) – dial 8 digits to program 8 extensions (see Table). Always dial a
number of 8 digits even if extensions are less than 8.
wait for the acknowledgement tone and hang up.
FT208P
FT105P
day night
FT105P 333303xxxxx 333305xxxxx
FT208P 333303xxxxxxxx 333305xxxxxxxx
4 5
I
N
T
E
R
C
O
M
S
FT
105P
208P
To program:
pick up the handset
- dialling tone
dial the access code 333320 to store password related to external line no.1
dial a chosen 4-digit password (from 0000 to 9999). Always dial a 4-digit number
wait for the acknowledgement tone and hang up.
Repeat the above procedure with a different password and access code for external line 2
(only FT208P).
Example: if the number below has been dialled:
3333200100 the actuator cards installed in the PABX can be activated by making a
call to external line 1 and dialling password 0100.
Operation
select the subscriber number to which the PABX is connected from an external telephone
- Public Exchange call control tone
wait for the D.I.S.A. post-dialling tone
dial 7
dial the password programmed for the specific external line
dial the number of the relay to be activated
1 relay 1
2 relay 2
3 relay 3
4 relay 4
select the relay action
(only for relays 2, 3 and 4.
Relay 1 is activated for 3
seconds)
0
the relay is deactivated
1 the relay is activated
2 the relay is activated for 3 seconds
acknowledgement tone.
Examples: make the connection with the user’s number and dial 7010032: relay 3 is
activated for 3 seconds, being 0100 the password related to external line 1 (see example
above). To enable relay 1, dial 7 + the password code + 1. Relay 1 can only be activated
for about 3 seconds.
Note
In case of incorrect dialling , of wrong password or no password within 5 seconds, the call
is automatically sent to all extensions enabled to receive external calls.
Password
7 1, 2, 3 or 4
FT105P 333320xxxx
FT208P 333320xxxx
333321xxxx
0, 1 or 2