FARFISA INTERCOMS FT 105P, Инструкция по установке, программированию и эксплуатации

Страница: 24 / 56

2 2
FT
105P
208P
O
P
E
R
A
T
I
O
N
HOW TO PUT THE EXTERNAL/INTERNAL LINE IN HOLD-ON
This function allows for putting the external/internal user in hold-on during the conversa-
tion.
Operation
During the conversation
press FLASH (dialling tone)
- the line is put in hold-on and the user hears:
- music in case of external conversation
- hold-on tone in case of internal conversation
press FLASH to resume the user in hold-on.
Notes
In case of external outgoing calls, the line can be put in hold-on only after 10 seconds
from the last digit dialled.
Put the call in hold-on and hang up. If no call is received and no conversation is in
progress, the telephone rings for 25 seconds to remind the operator of the hold-on call.
After that, the call is cleared.
INCLUSION
This function allows for an extension to overlap during a conversations between an
extension and the external line (or between 2 extensions).
Operation
The called user is busy because of an
external/internal call.
After the busy tone:
press FLASH
dial 5
- the user overlaps the conversation
- all users hear the inclusion tone
The three users can start the conversation.
Note: this service must be previously
programmed (see page 6)
Flash
Flash+5
3 1
ACCESS TO PUBLIC EXCHANGE SERVICES IN LD DIALLING
This function allows for accessing to Public Exchange Services from only telephones with
LD dialling (such as failure report, telegram dictation, automatic alarm, etc.). Dialling is
permitted on the external line with 10 second interval max. between digits.
Operation
During the connection with the external line, to send numbers (if programmed, time-out
is indicated by the warning tone to remind the end of LD dialling time):
dial 7
- 10 seconds are available to dial the next digit.
Notes
This is required only for telephones with LD dialling.
Signals are always sent from DTMF telephones.
ACCESS TO PUBLIC EXCHANGE SUPPLEMENTARY SERVICES
This function allows for sending a flash pulse in DTMF over the external line to access
Public Exchange supplementary services (such as call waiting, conference, answering
machine, etc.) (only from telephones with DTMF dialling).
During the external call:
press FLASH to put the external call in hold-on
dial 77 to send a flash pulse over the external line and resume the line
dial the number of the Public service desired.
The outgoing Flash is a line disconnection timed 64msec.
7
Flash+77
O
P
E
R
A
T
I
O
N
FT
105P
208P