9
SELF-CLEANING/FLUSHING
Flushing the Iron is advised after every 5 uses to prevent harmful
mineral build-up that can clog the Iron and prevent it from heating
and steaming properly.
1. Position Temperature Control Dial to the lowest MIN setting.
2. Turn the Variable Steam Dial to NO STEAM.
3. Fill the see-through Water Tank to the Maximum Fill Line.
4. Plug the Iron in and set the Temperature Control Dial to its
highest setting: Linen. Let the Iron heat for 2 minutes.
5. Turn the Variable Steam Dial to Maximum Steam setting.
6. Place a hand towel over the ironing surface.
7. Hold the Iron horizontally 2 inches above a towel, allowing
steam to flow through the Vents until the Water Tank is emptied.
You may also press the Burst of Steam Button several times,
pausing 5 seconds between bursts to allow the Iron to reheat.
8. Pass the Iron over a damp cloth to clean the Soleplate.
9. When finished, turn the Temperature Control Dial to the
lowest MIN setting and unplug from outlet. Allow the Iron to
cool completely before cleaning the exterior of the Iron or
before storing.
10. Use a cloth to wipe the exterior of the Iron before storing.
USER MAINTENANCE INSTRUCTIONS
This appliance requires little maintenance and contains no user
serviceable parts. Do not try to fix it yourself. Refer it to qualified
service personnel if servicing is needed.