7
USING THE SPRAY BUTTON
For a mist of water to moisten dry and difficult fabrics such as
linen, cotton or wool, or to handle stubborn wrinkles, press the
Spray Button . The Spray Function is also handy to moisten
creases accidentally ironed into the fabric.
NOTE: You may have to pump the Spray Button several
times the first time your use the Iron in order to start the
spraying action.
USING THE VERTICAL STEAM FUNCTION
The Vertical Steam feature allows you to eliminate wrinkles from
drapes without having to take them off the rod or freshen the
appearance of clothing while on the hanger.
1. Position Temperature Control Dial to the lowest MIN setting.
2. Turn the Variable Steam Dial to NO STEAM.
3. With the unit UNPLUGGED, fill the Iron's Water Tank. (See
FILLING THE WATER TANK instructions.)
4. Stand the Iron on its Heel in an upright position on an iron-safe
surface and plug it in.
5. Turn the Temperature Control Dial to the STEAM setting.
6. Allow approximately 2 minutes for the Iron to reach the desired
temperature.
7. Turn the Variable Steam Dial to for Vertical Steam. Hold
the Iron in a vertical position 6 inches from the fabric and
slowly guide along wrinkled area. For extra steam, press the
Burst of Steam Button.
8. When finished, turn the Temperature Control Dial to MIN and
unplug. Allow Iron to cool fully before cleaning the exterior of
the Iron or before storing.
CAUTION: Avoid coming into contact with escaping steam.
