USING THE APPLIANCE
9
OPERATION
WARNING:
-
Do not over or under fill the water reservoir (3). Make sure there is always
sufficient water inside and that it does not exceed the MAX line.
• Securely place a cup/mug in the center of the cup holder (10) (ill.
h
).
• Insert the plug (5) into a wall outlet (ill.
i
).
Brewing
• Push the ON/OFF button (6) to start the brewing process (ill.
j
).
TIP:
-
To stop the brewing cycle at any time, press the illuminated button.
WARNING:
-
Do not open the lid (2) or touch the appliance housing (ill.
l
) during use
(ill.
k
).
-
Never use the appliance with the water reservoir lid (4) open (ill.
m
) or
without the capsule holder (9) in the insert holder (11) (ill.
n
).
• When the brew cycle is complete, the illuminated button will switch off and the
Coffee Brewer will shut off.
• Disconnect the plug (5) from the wall outlet (ill.
p
).
• Remove the cup/mug from the cup holder (7).
• Allow the appliance to cool down before removing the capsule holder (9) from
the insert holder (11). Always remove any used capsules after use. Remove with
caution as recently used capsules can be hot.
WARNING:
-
The capsule holder is hot after using the appliance. Allow to cool before
removing.
-
Hot steam might be trapped under the lid (2).
NOTE:
-
If you want to brew another cup/mug of coffee, allow the appliance to cool
for at least 2 minutes, before starting a new brewing cycle. Always ensure
the water level is suitable for your next brew. Refill the water reservoir (3).
Always place a new capsule in the capsule holder (9). Do not reuse the same
capsule. Insert capsule holder (9) in the insert holder (11) and close the lid (2)
afterwards. Repeat previous steps ( Brewing).
K Cup Coffee Maker_201762_FW_IM_US_180709_II.indd 9
7/9/18 15:02
