USE AND MAINTENANCE MANUAL - SECTION 8
AERIAL PLATFORM ELEVAH 65-80 ES MOVE
– Rev. 03_2019
Page 8-2
CHANGING TORQUE REDUCER OIL
ATTENTION
PAY ATTENTION BECAUSE THE SURFACES ARE HOT DURING NORMAL
OPERATION
Change the exhaust oil with the reducer still hot.
Before changing the lubricant, make sure that the product has been at a
standstill for about 30 minutes, a sufficient amount of time for the oil
temperature to drop to levels which are not hazardous for the operator.
Before introducing new oil, flush any particles inside the casing using the
same type of oil.
You must only introduce the new oil when you are sure that there are no
impurities.
Follow these 5 steps to change the oil properly:
1. Places a sufficiently spacious container underneath the drain plug.
2. Remove the filler cap and drain plug, let the lubricant flow out and
wait as long as necessary for it to empty completely.
3. Replace the gaskets of the filler cap and drain plug and carefully
clean the magnet, if any.
4. Screw the drain plug back on and fit the reducer in its final position.
5. Fill the reducer with new oil until it reaches the level indicated in the
cap or the visual level and tighten the filler cap.
Содержание ELEVAH 65 ES MOVE
