ENGLISH
ENGLISH
GB-15
GB-14
3.
Position the middle hinge on the left
of the refrigerator and insert the gun of
hinge in the hole of the door then fix it
firmly.
4.
Remove the door stop of the Freezer door and put it to the opposite side. Align the
lower hole of the door to the gun of the left middle hinge while taking care of the
alignment of the door compared to the refrigerator.
left door stop
5.
Insert the gun of the upper hinge in the
upper hole of the door then fix it firmly.
6.
Screw the cover back to the top of
fridge.
MAINTENANCE
FRIDGE DEFROSTING
FREEZER DEFROSTING
The fridge defrosting process is carried out
automatically every time the compressor stops.
The defrost water is automatically routed to the
drain port and into a tray placed on the top of
the compressor to the rear of the appliance from
which it evaporates.
Make sure the drain port on the fridge at the rear
of the appliance is kept clear.
Frost will accumulate inside the freezer depending
upon the length of time during which the door is
left open or the amount of moisture introduced.
It is essential to ensure that no frost or ice is
allowed to form at places where it will affect the
close fitting of the door seal.
This might allow air to penetrate the cabinet,
thus encouraging continuous running of the
compressor.
