ENGLISH
ENGLISH
GB-57
GB-56
Problem
Possible Causes
What to Do
General
problems
White film on
inside surface
Hard water minerals To clean the interior,
use a damp sponge
with dishwasher
detergent and wear
rubber gloves. Never
use any other clea-
ner than dishwasher
detergent for the risk
of foaming or suds.
There are rust
stains on cutlery
The affected items
are not corrosion
resistant.
A programme was
not run after dis-
hwasher salt was
added. Traces of salt
have gotten into the
wash cycle.
Always run the quick
wash programme
without any crockery
in the dishwasher and
without selecting the
Turbo function (if
present), after adding
dishwasher salt.
The lid of the softer
is loose
Check the lip .Ensure
the fix is fine.
Noise
Knocking noise
in the wash cabi-
net
A spray arm is knoc-
king against an item
in a basket
Interrupt the pro-
gramme, and rear-
range the items which
are obstructing the
spray arm.
Rattling noise in
the wash cabinet
Items of crockery
are loose in the wash
cabinet
Interrupt the pro-
gramme, and rear-
range the items of
crockery.
Knocking noise
in the water pipes
This may be caused
by on-site installa-
tion or the cross-sec-
tion of the piping.
This has no influence
on the dishwasher
function, if in doubt,
contact a suitably
qualified plumber.
Problem
Possible Causes
What to Do
Unsatisfactory
washing result
The dishes are
not clean
The dishes were not
loaded correctly.
See notes in “Loading
the Dishwasher Bas-
kets”.
The programme
was not powerful
enough.
Select a more inten-
sive programme. See”
Wash Cycle Table”.
Not enough
detergent was dis-
pensed.
Use more detergent,
or change your
detergent.
Items are blocking
the path of spray
arms.
Rearrange the items
so that the spray can
rotate freely.
The filter combi-
nation in the base
of wash cabinet is
not clean or is not
correctly fitted. This
may cause the spray
arm jets to get bloc-
ked.
Clean and/or fit the
filter combination
correctly. Clean the
spray arm jets. See
“Cleaning the Spray
Arms”.
Cloudiness on
glassware
Combination of soft
water and too much
detergent.
Use less detergent if
you have soft water
and select a shortest
cycle to wash the
glassware and to get
them clean.
Black or gray
marks on dishes
Aluminum utensils
have rubbed against
dishes.
Use a mild abrasive
cleaner to eliminate
those marks.
Detergent left in
dispenser cups
Dishes block de-
tergent cups.
Re-loading the dishes
properly.