ENGLISH
ENGLISH
GB-15
GB-14
intended to optimise and customise the level of
salt consumption.
Please follow the steps below for adjustment in
salt consumption.
1. Switch on the appliance;
2. Press the Start/Pause button for more than 5
seconds to start the water softener set model
within 60seconds after the appliance was
switched on;
3. Press the Start/Pause button to select
the proper set according to your local
environment, the sets will change in the
following sequence: H1->H2->H3->H4-
>H5->H6;
4. Press the On/Off button to end the set up
model.
WATER HARDNESS
Selector Posi-
tion
Salt
consump-
tion (gram/
cycle)
°dH °fH °Clarke mmol/l
0~5
0~9
0~6
0~0.94
H1-Rapid light
bright
0
6-11 10-20
7-14
1.0-2.0
H2-90min light
bright
9
12-17 21-30 15-21
2.1-3.0
H3-
Rapid&90min
lights bright
12
18-22 31-40 22-28
3.1-4.0
H4-ECO light
bright
20
23-34 41-60 29-42
4.1-6.0
H5-ECO&Rapid
lights bright
30
35-55 61-98 43-69
6.1-9.8 H6-ECO&90min
lights bright
60
Note1:
1 dH=1.25 Clarke=1.78 fH=0.178mmol/l
dH: German degree
fH:
French degree
Clark: British degree
Note2:
The manufactory setting: H3 (EN 50242)
Contact your local water board for information
on the hardness of your water supply.
NOTE:
If your model does not have any
water softener, you may skip this section.
WATER SOFTENER
The hardness of the water varies from place to
place. If hard water is used in the dishwasher,
deposits will form on the dishes and utensils.
The appliance is equipped with a special softener
that uses a salt container specifically designed to
eliminate lime and minerals from the water.
