FAR K104/1, Инструкция по эксплуатации

Страница: 20 / 26

ENGLISH ENGLISH
GB-11 GB-10
QUICK START GUIDE
UNPACK YOUR FREEZER
Warning:
• Do not use sharp instruments, rubbing
alcohol, flammable fluids, or abrasive cleaners
to remove tape or glue. These products can
damage the surface of your freezer.
• Remove all foam spares parts especially
between outside condenser and cabinet.
1. Unpack the product.2. Remove all foams,
tape and stickers
(except rating plate).
INSTALL YOUR FREEZER
Warning:
• Use two or more people to move freezer. Fail
to do so can result in back or other injury.
• This appliance is designed for domestic use
only. Do not use outdoor.
• Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of
obstruction.
• Stand the appliance on a stable or flat surface.
• When moving the freezer, do not tilt the
freezer beyond 45° from upright position.
• Never install your freezer near heat source or
direct sunlight.
3. Install the fridge in
a ventilated location
and respect the
minimum space
distance.
LEVEL YOUR FREEZER
• If the freezer is not correctly level during
installation, the doors may not well close or
seal properly which will cause cooling, frost or
moisture problems.