ENGLISH
ENGLISH
GB-31
GB-30
TROUBLESHOOTING
Before calling for service please check the
following.
THE APPLIANCE IS NOT WORKING.
Check the plug is inserted correctly into the
mains socket.
Check there is power to the mains socket by
plugging another appliance in, if the other
appliance d ot work either, check the fuse in
the plug.
Clean the bottle frame, shelves and drawers with
a mild detergent and dry with a soft cloth.
Wipe the outer surface of the refrigerator with a
soft cloth dampened with soapy water, detergent,
etc., and then wipe dry.
Do not use hard brushes, clean steel balls, wire
brushes, abrasives, such as toothpastes, organic
solvents (such as alcohol, acetone, banana oil,
etc.), boiling water, acid or alkaline items clean
refrigerator considering that this may damage the
fridge surface and interior.
Boiling water and benzene may deform or
damage plastic parts.
Do not rinse with water so as not to affect the
electrical insulation properties.
It is advisable to clean the appliance regularly
and to remove any food deposits or splashes; in
particular, clean the door seals, recesses and
adjacent parts.
Don’t overlook parts of the appliance such as the
humidity controller, light casing, racks, egg and
butter compartments, ice cube tray, and all of the
drainage areas, etc.
If the appliance is not kept clean and in good
condition, its surface could deteriorate and
inexorably affect the length of its service life, and
could lead to a dangerous situation.
The appliance must not be steam cleaned.
Use only a non-abrasive sponge, rinse with clean
water then dry thoroughly before putting the
parts back in place.
Never use abrasive cleaning products or hard
metal scrapers to clean the appliance, as they
could scratch the surfaces and break down the
coating.
After cleaning, leave the inside of the appliance
to dry with the door open before plugging it into
the mains again.
When re-stocking the appliance, be especially
careful not to hit, scratch, crack or break the
internal surfaces.
