Fanvil X7 Скачать руководство пользователя страница 72

Страница: 72 / 162

9.1.2

Use the BLF Function

The BLF, also known as a "busy light field," notifies the user of the status of the

subscribed object and is used by the server to pick up the call. BLF helps you monitor the

other person's status (idle, ringing, talking, off).

BLF function

Monitor the status of subscribed phones.

Call

the

subscribed

number.

Transfer calls/calls to the subscribed number.

Pickup

incoming

calls

from

subscribed

number.

Monitors the status of subscribed phones.

Configuration BLF function keys, when the subscription of the number of the state (idle,

ringing, talking) is changed, the function key state of LED lights will have corresponding

change, see

appendix

6.3

to get to know each other under different status leds.

Call the subscribed number.

When the phone is in standby mode, press the configured BLF key to call out the

subscribed number.

Transfer calls/calls to the subscribed number.

Refer to

Table 9.1.1-blf function key

subtype parameter list, the BLF key can be used for

blind rotation, attention-rotation and semi-attention-rotation of the current call, and also

can invite the subscribed number to join the call and send DTMF, etc.

Pickup incoming calls from subscribed phones.

When configuring BLF function key, configure the pickup number.

When be subscription number telephone ringing, refer to

appendix

6.3 BLF LED

will

flash a red light at this time. At this point, press the BLF button to answer the incoming

call from the subscribed number.

9.2 BLF List

BLF List Key is to put the number to be subscribed into a group on the server side, and

the phone uses the URL of this group to make unified subscription. The specific

information, number, name and status of each number can be resolved based on notify

sent from the server. The unoccupied Memory Key is then set to the BLF List Key. If the

state of the subscription object changes later, the corresponding led light state will be

changed.

Configure BLF List function: log in the phone page, enter the [

Line

] >> [

SIP

] >>

[

Advanced settings

] page, open the BLF List, and configure the BLF List number.

Содержание X7



































































































































































Результаты поиска

Содержание X7

Отзывы:

Бренды по названию

Популярные бренды

Fanvil X7, Руководство пользователя

Результаты поиска

Содержание X7

Отзывы:

Бренды по названию

Популярные бренды