Fanvil X7 Скачать руководство пользователя

Страница: 120 / 162

109

Download Common

Config enabled

Whether phone will download the common configuration file.

Enable Server Digest

When the feature is enable, if the configuration of server is

changed, phone will download and update.

DHCP Option

Option Value

Confiugre DHCP option, DHCP option supports DHCP custom

option | DHCP option 66 | DHCP option 43, 3 methods to get

the provision URL. The default is Option 66.

Custom Option Value

Custom Option value is allowed from 128 to 254. The option

value must be same as server define.

Enable DHCP Option 120

Use Option120 to get the SIP server address from DHCP

server.

SIP Plug and Play (PnP)

Enable SIP PnP

Whether enable PnP or not. If PnP is enable, phone will send

a SIP SUBSCRIBE message with broadcast method. Any

server can support the feature will respond and send a Notify

with URL to phone. Phone could get the configuration file with

the URL.

Server Address

Broadcast address. As default, it is 224.0.0.0.

Server Port

PnP port

Transport Protocol

PnP protocol, TCP or UDP.

Update Interval

PnP message interval.

Static Provisioning Server

Server Address

Provisioning server address. Support both IP address and

domain address.

Configuration File Name

The configuration file name. If it is empty, phone will request

the common file and device file which is named as its MAC

address.

The file name could be a common name, $mac.cfg, $input.cfg.

The file format supports CFG/TXT/XML.

Protocol Type

Transferring protocol type

supports FTP

TFTP

HTTP and

HTTPS

Update Interval

Configuration file update interval time. As default it is 1, means

phone will check the update every 1 hour.

Update Mode

Provision Mode.

1. Disabled.

2. Update after reboot.

3. Update after interval.

Содержание X7



































































































































































Результаты поиска

Содержание X7

Отзывы:

Похожие инструкции для X7

Бренды по названию

Популярные бренды

Fanvil X7, Руководство пользователя

Результаты поиска

Содержание X7

Отзывы:

Похожие инструкции для X7

Бренды по названию

Популярные бренды