W610WUser Manual
131 / 136
12.34
Security >> Firewall
Picture 147 - Network firewall Settings
The user can set whether to enable the input through this page, output firewall and set the firewall input
and output rules. Using these Settings can prevent some malicious network access, or restrict internal users
access to some resources of the external network, which can improve security.
Firewall rule set is a simple firewall module. This feature supports two types of rules: input rules and
output rules. Each rule is assigned an ordinal number, allowing up to 10 for each rule.
Considering the complexity of firewall Settings, the following is an example to illustrate:
Table 28 - Network Firewall
Parameter
Description
Enable Input Rules
Indicates that the input rule application is enabled.
Enable Output Rules
Indicates that the output rule application is enabled.
Input/Output
To select whether the currently added rule is an input or output rule.
Deny/Permit
To select whether the current rule configuration is disabled or allowed;
Protocol
There are four types of filtering protocols: TCP | UDP | ICMP | IP.
Src Port Range
Filter port range
Src Address
Source address can be host address, network address, or all addresses
0.0.0.0; It can also be a network address similar to *.*.*.0, such as:
192.168.1.0.
Dst Address
The destination address can be either the specific IP address or the full
