Fanvil i23S, Руководство пользователя, Страница: 31 / 52

31 / 52
www.fanvil.com
Import Dial peer Table
Field Name Explanation
Select File Select an existing dialing rule file. The file type must be a .CSV
Add Dial Peer
Number
To add an outgoing call number. The outgoing call number can be divided
into two types: one is the exact match, and after the exact match, if the
number is exactly the same as the user dialing the called number, the
device will use the IP address of this number mapping or (This is the area
code prefix function of the PSTN). If the number matches the N-bit (prefix
number length) of the called number, the device uses the IP address or
configuration mapped to this number. Make a call. Configuration prefix
matching needs to be followed by a prefix number to match the exact
match number; the longest support is 30 bits; also supports the use of x
format and range of numbers.
Destination
Configure the destination address. If it’s configured as a point-to-point call,
write the peer IP address directly. Can also be set to domain name, by the
device DNS server to resolve the specific IP address. If it is not configured,
the IP address is 0.0.0.0. This is an optional configuration item
Port
Configure the signaling port of the other party. This is an optional
configuration item. The default is 5060
Alias
Configure aliases. This is an optional item: the replacement number will be
used when the prefix is prefixed, and no alias when it is configured
Note: aliases are divided into four types and must be combined with the replacement length:
1) add: xxx, add xxx before the number. This can help users save dialing length;
2) all: xxx, all replaced by xxx; can achieve speed dial, such as user configuration dial-up 1, then
by configuring all: number to change the actual call out the number;
3) del, delete the number before the n bit, n by the replacement length set;