Fanvil i23S, Руководство пользователя, Страница: 21 / 52

21 / 52
www.fanvil.com
MAC
Timestamp
Get the MAC address of time.
Settings
Select the appropriate network mode. The equipment supports three network modes:
Static
IP
Network parameters must be entered manually and will not change. All
parameters are provided by the ISP.
DHCP Network parameters are provided automatically by a DHCP server.
PPPoE
Account and Password must be input manually. These are provided by your
ISP.
If Static IP is chosen, the screen below will appear. Enter values provided by the ISP.
DNS Server
Configured by
Select
the
Configured mode
of the
DNS Server
.
Primary DNS
Server
Enter the server address of the
Primary DNS
.
Secondary
DNS Server
Enter the server address of the
Secondary DNS
.
Click the APPLY button after entering the new settings. The equipment will save the new settings
and apply them. If a new IP address was entered for the equipment, it must be used to login to
the phone after clicking the APPLY button.
Service Port Settings
Web Server
Type
Specify Web Server Type – HTTP or HTTPS
HTTP Port
Port for web browser access. Default value is 80. Change this from the default
to enhance security. Setting this port to 0 will disable HTTP access.
Example: The IP address is 192.168.1.70 and the port value is 8090. The
accessing address is http://192.168.1.70:8090.
HTTPS Port
Port for HTTPS access. An https authentication certification must be
downloaded into the equipment before using https.
Default value is 443. Change this from the default to enhance security.
Note:
1) Any changes made on this page require a reboot to become active.
2) It is suggested that the make the values bigger than 1024 if users change the port to HTTPS.
Values less than 1024 are reserved.
3) If the HTTP port is set to 0, HTTP service will be disabled.
b) Advanced