Fanvil FH-S01, Руководство пользователя

Страница: 61 / 63

56
By state
Reset the output port status when device’s call state
changes.
Trigger by URI
Enable or disable trigger by URI.
User can send commands from remote device or server to i16SV
series device, if the command is correct, then device will trigger
corresponding output port.
Trigger by SMS
Enable or disable trigger by SMS.
User can send ALERT command to i16SV series device, if the
command is correct, then device will trigger corresponding output port.
Trigger By Call
state
Select call state to trigger the output port, options are:
Talking: When the device’s talking status changes, trigger the output
port.
Ringing: When the device’s ringing status changes, trigger the output
port.
Calling: When the device’s calling status changes, trigger the output
port.
Trigger By DssKey
Enable or disable trigger by dsskey. If any of the dsskey is selected,
when the dsskey application performs, the output port will be triggered.
Tamper Alarm Settings
Enable Tamper
Alarm If the terminal is forcibly removed, the tamper will be triggered and the
set alarm ring will be played all the time
Alarm command
When the alarm is triggered, the server sends the command
immediately
Reset command
If the alarm bell needs to be stopped, the remote end can send a short
message to the terminal. The content of the short message is the value
set in the reset command. At this time, the terminal will stop playing the
alarm bell
Alarm Ringtone The ringtone of alarm
Tamper Alarm Reset
Reset Alarm
Status
One key reset alarm status