Fanvil FH-S01, Руководство пользователя, Страница: 60 / 63

55
server. The message format is as follows
：
Alarm_Info:Description=$model;SIP
User=$active_user;Mac=$mac;IP=$ip;port=$trigger
Input settings
Input Detect Enable or disable Input Detect
Triggered by
When choosing the low level trigger (closed trigger), detect the input
port (low level) closed trigger.
When choosing the high level trigger (disconnect trigger), detect the
input port (high level) disconnected trigger.
Input Duration
事件行为在持续检测时间内不断，触发相应的设置
Triggered Action
启用或禁用输入端口发送消息到服务器
Dss Key
设置为
dsskey
时，触发
dsskey
进行呼叫，默认为
none
Triggered Ringtone Select triggered ring tone.
Output Settings
Output Detect Enable or disable Output Detect
Triggered by
DTMF Ring tone
Select the DTMF trigger ring tone.
Triggered by URI
Ringtone
Select the URI trigger ring tone.
Triggered By SMS
Ringtone
Select the SMS trigger ring tone.
Triggered By
Dsskey Ringtone
Select the Dsskey trigger ring tone.
Standard Status
When choosing the low level trigger (NO: normally open), when meet
the trigger condition, trigger the NO port disconnected.
When choosing the high level trigger (NC: normally close), when meet
the trigger condition, trigger the NC port close.
Output Duration Set the output change duration time, the default is 5 seconds.
Output Trigger
Mode When the input port meets the trigger condition, the output port will
trigger (the port level time changes, controlled by < output duration >).
Trigger by DTMF
Enable or disable trigger by DTMF. The device will check the received
DTMF sent by remote device, if it matches the DTMF trigger code, the
device will trigger corresponding output port.
DTMF Trigger
Code
Input the DTMF trigger code, default value is 1234.
DTMF Reset Code Input the DTMF reset code, default value is 4321.
Reset By By duration
Reset the output port status when output duration
occurs.