Fanvil FH-S01, Руководство пользователя

Страница: 47 / 63

42
Default Dial Mode Default Dial Mode:video or audio.
Enable Restricted
Incoming List
Whether enable Restricted Incoming List
Enable Restricted
Outgoing List
Wether enable Restricted Outgoing List
Enable country Code Wether enable country Code
Country Code Country Code
Area Code Area Code
Allow IP Call If enabled, user can dial out with IP address
P2P IP Prefix You can set IP call prefix,for example,i set it as “172.16.2.”,then i input
#160 in dialpad and press dial key ,it will call 172.16.2.160 automatically
Restrict Active URI
Source IP Set the device to accept Active URI command from specific IP address.
Push XML Server Configure the Push XML Server, when phone receives request, it will
determine whether to display corresponding content on the phone which
sent by the specified server or not.
Call Number Filter
Configure a special character & ,if the number is 78 & 9. The call will be
filtered out&
Auto Resume Current If the current path changes, the hold will be automatically resume
Auto Resume Current If the current path changes, the hold will be automatically resume
Limit Talking Duration Automatically hang up the call after enabling the time set for the call
Talking Duration Call duration ,20-600s
No Answer Auto HangUp
Timeout If the call is not answered, the call will be automatically hung up after the
timeout
Enable Push XML Auth To enable push xml auth, user password is required
Ring Timeout It configures ringing time of incoming call
Description
Enable Tamper Alarm
Enable or prohibit anti disassembly detection and handle detection
Tone Settings
Enable Holding Tone When turned on, a tone plays when the call is held
Enable Call Waiting Tone When turned on, a tone plays when call waiting
Play Dialing DTMF Tone
Play DTMF tone on the device when user pressed a phone digits at
dialing, default enabled.
Play Talking DTMF Tone Play DTMF tone on the device when user pressed a phone digits during
taking, default enabled.
Auto Answer Tone Start auto answer prompt tone
Intercom Settings