30
To save the memory and avoid abundant input of user, add the follow functions:
1
、
x Match any single digit that is dialed.
If user makes the above configuration, after user dials 11 digit numbers started with 13, the
phone will send out 0 plus the dialed numbers automatically.
2
、
[] Specifies a range that will match digit. It may be a range, a list of ranges separated by commas, or a list
of digits.
If user makes the above configuration, after user dials 11 digit numbers started with from 135
to 139, the phone will send out 0 plus the dialed numbers automatically.
Use this phone you can realize dialing out via different lines without switch in web
interface.
DIAL PEER
Field name
explanation
Phone number
There are two types of matching conditions: one is full matching,
the other is prefix matching. In the Full matching, you need input
your desired phone number in this blank, and then you need dial the
phone number to realize calling to what the phone number is
mapped. In the prefix matching, you need input your desired prefix
number and T; then dial the prefix and a phone number to realize
calling to what your prefix number is mapped. The prefix number
supports at most 30 digits.
Destination
Set Destination address. This is optional config item. If you want to
set peer to peer call, please input destination IP address or domain
name. If you want to use this dial rule on SIP2 line, you need input
255.255.255.255 or 0.0.0.2 in it.SIP3 into 0.0.0.3
Port
Set the Signal port, the default is 5060 for SIP.
Alias
Set alias. This is optional config item. If you don’t set Alias, it will
show no alias.
Note: There are four types of aliases.
