Fanvil BW320, Руководство пользователя

Страница: 17 / 53

17
User can set prefix in random, in the case of no affecting current dialing rules.
3.2.10. Click to dial
When user A browses in an appointed Web page, user A can click to call user B via a link
(this link to user B), then user A’s phone will ring, after A hooks off, the phone will dial to B.
4. Setting
4.1. Introduction of configuration
4.1.1. Ways to configure
BW320 has three different ways to different users.
z
U
se phone keypad.
z
U
se web browser
（
recommendatory way
）
.
z
U
se telnet with CLI command.
4.1.2. Password Configuration
There are two levels to access to phone: root level and general level. User with root level can
browse and set all configuration parameters, while user with general level can set all
configuration parameters except SIP (1-2) or IAX2’s that some parameters can not be
changed, such as server address and port. User will has different access level with different
username and password.
z
Default user with general level
：
‹
u
sername
：
guest
‹
p
assword
：
guest
z
Default user with root level
：
‹
u
sername
：
admin
‹
p
assword
：
admin
The default password of phone screen menu is 123.
4.2. Setting via web browser
When this phone and PC are connected to network, enter the IP address of the wan port in
this phone as the URL (e.g. http://xxx.xxx.xxx.xxx/ or http://xxx.xxx.xxx.xxx:xxxx/).
If you do not know the IP address, you can look it up on the phone’s display by pressing
button.
The login page is as below picture
※
:Input username and password, click “logon”, and you will enter setting web interface.
There is a selection menu on the left side of the web interface. Click on the desired submenu;
the current settings of this submenu will be displayed in the larger field on the right. You can
now modify and store the values by using mouse and keyboard of your PC. To save the
changes, click on the submenu “maintenance” and then click the “config” button and the
“Save” button on the right field.