Fanvil BW320, Руководство пользователя

Страница: 12 / 53

12
Soft2 (Dial) or press to dial the current number shown on the screen.
z
Use the R/send key
Please pick up or press the key. After you hear dialing tone, please press the
key or press the Soft3(Redial) to dial the last phone number. Note: after you reboot the
phone, the phone will delete callers and Redial will be invalid.
z
Multi
-
line
calls
BW320 supports 2 SIP lines max
，
that is user could use 2 SIP accounts to register and
make calls. System will use SIP 1 as default line to call. User can use the to
select the line to call.
There are most two calls at the same time. Screen will display the incoming call
number when user is keep talking. You can press the Soft1 (Answer) to accept it, and hold
the first one (if you want to use this function, you need enable Call Waiting of the phone first).
Use Soft1 (Switch) to switch the two calls to talk. User can also use Soft1 (Conf) to make the
second call when there is just an active call.
3.1.3. Ending a call
z
Hangs up by handset onhook.
z
Hangs up by press when in hands-free.
z
Hangs up a call in call waiting state.
When there are two calls
，
user might use Soft1(Switch)to switch to the call you want to
hang up first. Then press # or press Soft3(Close) key to finish talk, and phone will switch to
the other call automatically.
Note
：
it is no use to press # to finish talk, if there is only one current call.
3.1.4. Transferring a call
z
Blind Transfer
During talk, press
，
and then dial the number that you want to transfer to, and press #.
Phone will transfer the current call to the third party. After finishing transfer, the call you talk
to will be hanged up. User can not select SIP line when phone transfers call.
z
Attended Transfer
During talk, press and input the number that you want to transfer to and press Soft2
(Send). After that third party answers, then press to complete the transfer. (You need
enable call waiting and call transfer first). If there are two calls, you can just talk to one, and
keep hold to the other one. The one who is keep hold can not speak to you or hear from you.
In this status, user can press * or Soft2 (Conf) to make calls mode in conference mode. If
user wants to stop conference, user can press Soft1 (Split). (User must enable call waiting
and three way call first).
Note: the server that user uses must support RFC3515 or it might not be used.
z
Alert Transfer
During talk, press firstly, then press Soft2(Send) after inputting the number that you
want to transfer. You are waiting for connection, now, press Soft2(Transf) and the transfer
will be done. (To use this feature, you need enable call waiting and call transfer first)