32
keep blank.
Password
Set FTP server Password.
Config File Name
Set configuration file’s name which need to update. System will use
MAC as config file name if config file name keep blank. For
example, 000102030405.
。
Config Encrypt Key
Input the Encrypt Key, if the configuration file is encrypted.
Protocol Type
Select the Protocol type FTP
、
TFTP or HTTP.
Update Interval Time
Set update interval time, unit is hour.
Update Mode
Different update modes:
1. Disable: means no update
2. Update after reboot: means update after reboot.
3. Update at time interval: means periodic update.
Enable DHCP Option 66
If this option is enabled, TFTP server address defaults to the value
of option 66
4.3.5.2. Syslog Config
Syslog is a protocol which is used to record the log messages with client/server mechanism. Syslog server
receives the messages from clients, and classifies them based on priority and type. Then these messages will
be written into log by some rules which administrator can configure. This is a better way for log management.
8 levels in debug information:
Level 0---emergency: This is highest default debug info level. You system can not work.
Level 1---alert: Your system has deadly problem.
Level 2---critical: Your system has serious problem.
Level 3---error: The error will affect your system working.
Level 4---warning: There are some potential dangers. But your system can work.
Level 5---notice: Your system works well in special condition, but you need to check its working
environment and parameter.
Level 6---info: the daily debugging info.
Level 7---debug: the lowest debug info. Professional debugging info for R&D person.
At present, the lowest level of debug information send to Syslog is info, debug level only can be displayed
on telnet.
Syslog Configuration
Field name
explanation
Server IP
Set Syslog server IP address.
Server Port
Set Syslog server port.
MGR Log Level
Set the level of MGR log.
SIP Log Level
Set the level of SIP log.
Enable Syslog
Select it or not to enable or disable syslog.
