16
Active IP
The current IP address of the phone.
Current Netmask
The current Netmask address.
MAC Address
The current MAC address of the phone.
Current Gateway
The current Gateway IP address.
Get MAC Time
Shows the time of getting MAC address
Please select the proper network mode according to the network condition. FV6030 provide
three different network settings:
Static: If your ISP server provides you the static IP address, please select this mode, and
then finish Static Mode setting. If you don’t know about parameters of Static Mode
setting, please ask your ISP for them.
DHCP: In this mode, you will get the information from the DHCP server automatically;
need not to input this information artificially.
PPPoE: In this mode, your must input your ADSL account and password.
You can also refer to 3.2.1 Network setting
to speed setting your network.
If you use static mode, you need set it.
IP Address
Input the IP address distributed to you.
Netmask
Input the Netmask distributed to you.
Gateway
Input the Gateway address distributed to you.
DNS Domain
Set DNS domain postfix. When the domain which you inputted can
not be parsed, phone will automatically add this domain to the end
of the domain which you inputted before and parse it again.
Primary DNS
Input your primary DNS server address.
Alter DNS
Input your standby DNS server address.
Select it to use DHCP mode to get DNS address. If you disable it,
you will use static DNS server. The default is enabling it.
If you uses PPPoE mode
，
you need to make the above setting.
PPPoE Server
It will be provided by ISP.
Username
Input your ADSL account.
Password
Input your ADSL password.
Notice:
1
）
Click “Apply” button after finished your setting, IP Phone will save the setting automatically
and new setting will take effect.
2
）
If you modify IP address, the web will not response by the old IP address. Your need input
new IP address in the address column to logon in the phone.
3
）
If networks ID which is distributed by DHCP server is same as network ID which is used by
LAN of system, phone will use the DHCP IP to set WAN, and modify LAN’s networks
ID(for example, system will change LAN IP from 192.168.10.1 to 192.168.11.1) when
phone uses DHCP client to get IP in startup; if phone uses DHCP client to get IP in running
