fanttik NEX L1 Pro, Инструкция по эксплуатации

Страница: 7 / 61

LED Flashlight
Gently squeeze the speed adjustment trigger to turn on the LED flashlight.
Charging
To charge the screwdriver, connect it to a 5V 1/2A adapter using a USB-C cable.
The indicator flashes during charging.
When charging is complete, the indicator switches off.
4 lights indicates 100%-75% charge.
3 lights indicates 75%-50% charge.
2 lights indicates 50-25% charge.
1 light indicates less than 25% charge. No lights means out of power.
Installing and Removing the Bit
Thank you for purchasing
Fanttik NEX L1 Pro
Cordless Screwdriver 3.6V
Please read this manual and safety guidelines carefully before using the product and keep it in a safe place.
Product Introduction
Usage Instructions
Drill Direction Selector
● For tightening a screw, switch the indicator to:
● For undoing a screw, switch the indicator to:
Torque Control Selector
According to different screw torque needs, press the switch to select 1-6 setting.
Display:
Note: It's a good idea to start with a low torque setting and gradually work up to find the optimal setting for that
particular screw.
Stepless Speed Adjustment
● Press the trigger to power on the device. Hold it down to gradually increase the speed, and the LED will turn on.
● Release the trigger to stop the device. The LED will turn off after 5 seconds.
Technical Specifications
Note:
Overheat protections will prevent the device from charging when temperatures exceed 60°C .
When the temperature is <0°C , charging power is limited
Accessories
¼ inch (6.35mm)
1 inch: PH0, PH2, PH3; SL 5, PZ 2; TH10, TH15, TH20, TH25; HEX 3, HEX 4, HEX 5
2 inch: PH 1
Extension rod: 60mm
Made in china
Safety instructions
General Power Tool Safety Warnings
WARNING
！
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool "in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
Work area safety
●
●
●
Electrical safety
●
●
●
●
●
●
Personal safety
●
●
●
Model name:
Rated voltage:
No-load speed:
Max torque hard/soft screwdriving:
Min torque hard/soft screwdriving:
Max screw diameter:
Permitted ambient temperature:
Battery:
Capacity:
Energy:
Charging Input:
Charging time:
Number of battery cells:
Weight:
Dimensions:
Bit size:
NEX L1 Pro
3.6V
0-220 rpm
6 Nm/4 Nm
0.5 Nm/0.3 Nm
5mm
During charging - 0°C to +45°C
During operation and storage: -20°C to +50°C
Li-ion Battery
2000mAh
7.2Wt
5V 1A/2A;
5V 2A - 1.5 hours, 5V 1A - 3 hours
1
340g
140mm x 41.5mm x 130mm
¼ inch (6.35mm)
Cordless screwdriver
●
●
●
●
●
Power tool use and care
●
●
●
●
●
●
●
●
Battery tool use and care
●
●
●
●
●
●
●
Service
●
●
Safety Warnings for Screwdrivers
●
●
●
●
●
●
Safety instructions for power supply
●
●
●
●
Maintenance and Service
Maintenance and Cleaning
-
-
Transport
The contained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. The batteries are suitable
for road-transport by the user without further restrictions.
When shipping by third parties (e.g. :by air transport or forwarding agency) ,special requirements on packaging and labelling
must be observed. For preparation of the item being shipped, consulting an expert for hazardous material is required.
Disposal
Power tools, rechargeable batteries, accessories and packaging should be sorted for environmental-friendly recycling.
Do not dispose of power tools and batteries/rechargeable batteries into household waste!
Battery packs/batteries:
Li-ion:
Please observe the notes in the section on transport .
●
Before you can remove the battery from the power tool, you will need to use the power tool until the battery is completely
discharged. Unscrew the screws on the housing and remove the housing shell in order to remove the battery. To prevent a
short circuit, disconnect the connectors on the battery one at a time and then isolate the poles. Even when fully discharged,
the battery still contains a residual capacity which can be released in case of a short circuit.
04
English –
WARRANTY
Your Warranty Includes
30 Days Money Back Guaranty
With in first 30days of your purchase, you are allowed to return your product for a full refund
30 Days to 3 Months(6 Months)
We will replace the defective unit due to manufacture fault with a new one.
(You will receive extra 3 months if you register on our website.)
3 Months to 24 Months
Within 24 months, we will provide timely and effective online after-sales service after your purchase.Please be noted that
accesories are free, not included.
How to Return Your fanttik Products
Contact support@fanttik.com with your order number.
We will issue you RMA# and return address for your return.
Please fill out RMA info, tear off this page and leave it inside your return package.
We will issue replace/return after receiving your return.
Return Products Details
To get your returns processed as quickly as possible, please fill this form and include it in your return package.
If your product is purchased from Amazon Fulfilled channel,please contact
Amazon for return within 30 days of purchase.