fanttik NEX L1 Pro, Инструкция по эксплуатации

Страница: 10 / 61

LED Flashlight
Gently squeeze the speed adjustment trigger to turn on the LED flashlight.
Charging
To charge the screwdriver, connect it to a 5V 1/2A adapter using a USB-C cable.
The indicator flashes during charging.
When charging is complete, the indicator switches off.
4 lights indicates 100%-75% charge.
3 lights indicates 75%-50% charge.
2 lights indicates 50-25% charge.
1 light indicates less than 25% charge. No lights means out of power.
Installing and Removing the Bit
Thank you for purchasing
Fanttik NEX L1 Pro
Cordless Screwdriver 3.6V
Please read this manual and safety guidelines carefully before using the product and keep it in a safe place.
Product Introduction
Usage Instructions
Drill Direction Selector
● For tightening a screw, switch the indicator to:
● For undoing a screw, switch the indicator to:
Torque Control Selector
According to different screw torque needs, press the switch to select 1-6 setting.
Display:
Note: It's a good idea to start with a low torque setting and gradually work up to find the optimal setting for that
particular screw.
Stepless Speed Adjustment
● Press the trigger to power on the device. Hold it down to gradually increase the speed, and the LED will turn on.
● Release the trigger to stop the device. The LED will turn off after 5 seconds.
Technical Specifications
Note:
Overheat protections will prevent the device from charging when temperatures exceed 60°C .
When the temperature is <0°C , charging power is limited
Accessories
¼ inch (6.35mm)
1 inch: PH0, PH2, PH3; SL 5, PZ 2; TH10, TH15, TH20, TH25; HEX 3, HEX 4, HEX 5
2 inch: PH 1
Extension rod: 60mm
Made in china
Safety instructions
General Power Tool Safety Warnings
WARNING
！
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool "in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
Work area safety
●
●
●
Electrical safety
●
●
●
●
●
●
Personal safety
●
●
●
●
●
●
●
●
Power tool use and care
●
●
●
●
●
●
●
●
Battery tool use and care
●
●
●
●
●
●
●
Service
●
●
Safety Warnings for Screwdrivers
●
●
●
●
●
●
Safety instructions for power supply
●
●
●
●
Maintenance and Service
Maintenance and Cleaning
-
-
Transport
The contained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. The batteries are suitable
for road-transport by the user without further restrictions.
When shipping by third parties (e.g. :by air transport or forwarding agency) ,special requirements on packaging and labelling
must be observed. For preparation of the item being shipped, consulting an expert for hazardous material is required.
Disposal
Power tools, rechargeable batteries, accessories and packaging should be sorted for environmental-friendly recycling.
Do not dispose of power tools and batteries/rechargeable batteries into household waste!
Battery packs/batteries:
Li-ion:
Please observe the notes in the section on transport .
●
Before you can remove the battery from the power tool, you will need to use the power tool until the battery is completely
discharged. Unscrew the screws on the housing and remove the housing shell in order to remove the battery. To prevent a
short circuit, disconnect the connectors on the battery one at a time and then isolate the poles. Even when fully discharged,
the battery still contains a residual capacity which can be released in case of a short circuit.
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres , such as in the presence of flammable liquids , gases or dust. Power
tools create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces , such as pipes, radiators, ranges and refrigerators. There is an
increased risk of electric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat,
oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for out-door use. Use of a cord suitable for outdoor
use reduces the risk of electric shock.
lf operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of
an RCD reduces the risk of electric shock.
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while
you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools
may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid
safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery
pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that
have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of
the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry . Keep your hair and clothing away from moving parts. Loose clothes,
jewelry or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and
properly used. Use of dust collection can re- duce dust-related hazards.
Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles.
A careless action can cause severe injury within a fraction of a second.
Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better
and safer at the rate for which it was de- signed.
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch
is dangerous and must be repaired.
Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before
making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk
of starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other
condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc.in accordance with these instructions, taking into account the working conditions and
the work to be per- formed. Use of the power tool for operations different from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do
not allow for safe handling and control of the tool in unexpected situations.
Recharge only with the charger specified by the manufacturer, A charger that is suitable for one type of battery pack may
create a risk of fire when used with another battery pack.
Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails , screws or other small metal
objects , that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact.
If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable
behaviour resulting in fire, explosion or risk of injury.
Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130C may cause explosion.
Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions.
Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
Never service damaged battery packs. Service of battery packs should only be per- formed by the manufacturer or authorized service providers.
Hold the power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.
Use suitable detectors to determine if there are hidden supply lines or contact the local utility company for assistance.
Contact with electric cables can cause fire and electric shock. Damaging gas lines can lead to explosion. Breaking water
pipes causes property damage.
Hold the power tool securely. When tightening and loosening screws be prepared for temporarily high torque reactions.
Before any work on the power tool (e.g. maintenance, tool change, etc. ) as well as during transport and storage, set the
rotational direction switch to the middle position. There is risk of injury from unintentionally pressing the on/off switch.
Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more secure than by hand.
Always wait until the power tool has come to a complete stop before placing it down. The application tool can jam and
cause you to lose control of the power tool. Protect the power tool against heat, e.g. against continuous intense sunlight,
fire, water, and moisture. There is a risk of explosion.
This power supply is not intended for use by children or persons with physical, sensory or mental limitations or a lack of
experience or knowledge. This power supply can be used by children aged 8 or older and by persons who have physical,
sensory or mental limitations or a lack of experience or knowledge if a person responsible for their safety supervises them
or has instructed them in the safe operation of the power supply and they understand the associated dangers. Otherwise,
there is a risk of operating errors and injuries.
Do not expose the power supply to rain or wet conditions. Water entering the power supply will increase the risk of electric shock.
Keep the power supply clean. Dirt poses a risk of electric shock.
Always check the power supply before use. Stop using the power supply if you discover any damage. Do not open the
power supply yourself, and have it re- paired only by a qualified specialist using only original replacement parts. Dam- aged
power supplies increase the risk of electric shock.
Before any work on the power tool (e.g. maintenance, tool change, etc. ) as well as during transport and storage, set the
rotational direction switch to the middle position. There is a risk of injury if the power tool is started up accidentally.
Keep the power tool clean to ensure good, safe operation.
Integrated batteries may only be removed for disposal by qualified personnel. Opening the housing shell can destroy the power tool.
07
– English
WARRANTY
Your Warranty Includes
30 Days Money Back Guaranty
With in first 30days of your purchase, you are allowed to return your product for a full refund
30 Days to 3 Months(6 Months)
We will replace the defective unit due to manufacture fault with a new one.
(You will receive extra 3 months if you register on our website.)
3 Months to 24 Months
Within 24 months, we will provide timely and effective online after-sales service after your purchase.Please be noted that
accesories are free, not included.
How to Return Your fanttik Products
Contact support@fanttik.com with your order number.
We will issue you RMA# and return address for your return.
Please fill out RMA info, tear off this page and leave it inside your return package.
We will issue replace/return after receiving your return.
Return Products Details
To get your returns processed as quickly as possible, please fill this form and include it in your return package.
If your product is purchased from Amazon Fulfilled channel,please contact
Amazon for return within 30 days of purchase.