6
FAN COIL ROOM THERMOSTAT
CH130ARR2
1 - INSTALLATION
ATTENTION!
Installation must be carried out by qualified personnel, in compliance with the requirements concerning
installation of electrical devices. Make sure that the power network is disconnected before making any
connections or working on the device.
The thermostat
CH130AR2
is supplied with a base suitable for assembly both wall-mounted and recessed in rectangular
3-place box (503) or round.
Screws
Screws
Base
Fixing
hole
Multi-polar
connector
Fixing
hole
Fixing
hole
■
Remove the top cover of the thermostat.
■
Divide the base and front of the thermostat by removing the screws with a specific tool and extracting the front part.
■
Fix the base to the required surface by means of the specific fixing holes; and make sure that the base is well secured,
without deformations and that the multi-polar connector is at the bottom right corner.
■
For proper operation, the base must be approximately 1.5 metres above the floor, away from heat sources (direct
sunlight, etc.) and from doors and windows.
■
Insert the thermostat on the base and screw it, making sure that the multi-polar connector is inserted properly.
■
Refit the top cover.
