3
4 TEMPERATURE AREA WIRELESS TEMPERATURE CONTROL KIT
CH180T3K5
START-UP
ATTENTION!
Installation must be done by qualified personnel in compliance with the requirements
concerning installation of electrical equipment. Installation operations must be performed
with the system’s power disconnected.
Install the programmable thermostat in area 1
Install the thermostats,
without batteries
, in areas 2, 3 and 4
1
2
The
CH180RFWIFI
programmable thermostat must be installed on the wall or on a flush mounting box,
in 3 units or round, at a height of about 1.5m from the floor, in a suitable position to detect the room
temperature correctly.
For installation, refer to the QUICK GUIDE contained in the programmable thermostat package
CH180RFWIFI.
The
CH120RF
thermostats must be installed on the wall or on a flush mounting box, in 3 units or round,
at a height of about 1.5m from the floor, in a suitable position to detect the room temperature correctly.
For installation, refer to the QUICK GUIDE contained in the CH120RF thermostat package.
Install the O60RF actuators,
without batteries,
on the radiators, as indicated in the instruction sheet
contained in their packaging.
Be sure to position each O60RF in the correct area (as indicated in the label on the product).
EXAMPLE
Actuator to be installed in
area 2
Thermostat to be installed in
area 2
Z : _
2
3
Be sure to position each CH120RF in the correct area (as indicated in the label on the product).
EXAMPLE
Z : _
2
