Fantini Cosmi CH170D Скачать руководство пользователя страница 4

8

During  normal  operation  certain  radio  signals  could  be  lost  due  to  external 

disturbances, these interferences however do not impair device operation if 

they last for a short time.

TECHNICAL DATA

Operating temperature: -10°C +45°C

Storage and transport ambient temperature: -25°C +60°C

Compliance with regulations: BT, EMC, R&TTE.

Standards: EN60730-1, EN 301 489-3, EN 300 220-3.

Power supply: 230V 50 Hz

Container: IP20

Absorbed power: 2VA

Relay output: 5(3) A 250 V~

Switching contacts: voltage-free

Receiver: :OOK868,350 MHz

Sensitivity: -104 dBm

Container dimensions: 3 modules, 17.5 mm per rail

EN50022

Degree of pollution: 2

Software class: A
Double insulation 

Disconnection: 1B type

Installation type: back panel mounting

Impulse voltage : 4000V

10 sec.

230V c.a.

N

L

4

1

2

Fantini  Cosmi  reserves  the  right  to  introduce  whatever  make  and  technical 

change at any time without prior notice.

Содержание CH170D

Страница 1: ...vironmental conditions Do not shield the device with metallic parts Connect cables to the base terminal board according to the wiring diagrams shown Receiver power supply 230 V a c shall be connected to terminals N and L whereas the user pump burner zone valve humidistat etc shall be connected to terminals 1 and 2 N B Several receivers can be connected to one transmitter OPERATION The receiving de...

Страница 2: ...perating mode the receiver receives a radio signal coded by the chron othermostat via the transmitter interface and triggers the integral relay The POWER ON led takes on a different colour according to the quality of the signal received RED signal absent or very disturbed ORANGE satisfactory reception GREEN good reception Fast and brief led flashing indicates the reception of radio data sent by th...

Страница 3: ...ceiver on and then keep the button pressed until selecting the AUTOMATIC MODE see paragraph OPERATION 2 Keep the button pressed for over 10 seconds to start the SELF LEARNING procedure the AUTO led will start flashing 3 Force radio thermostat chronothermostat transmission refer to the relevant user s guide 4 Carry out the OPERATION CHECK procedure to check for correct configu ration of the program...

Страница 4: ... EN60730 1 EN 301 489 3 EN 300 220 3 Power supply 230V 50 Hz Container IP20 Absorbed power 2VA Relay output 5 3 A 250 V Switching contacts voltage free Receiver OOK868 350 MHz Sensitivity 104 dBm Container dimensions 3 modules 17 5 mm per rail EN50022 Degree of pollution 2 Software class A Double insulation Disconnection 1B type Installation type back panel mounting Impulse voltage 4000V 10 sec 23...

Отзывы: