background image

6

CONTACT STATUS

AUTO

POWER ON

Boiler

30 metres max.

Receiver

Transmitter

Chronothermostat/

thermostat

N L

4 1 2

Each  time  the  button  is  pressed  the  three  operating  modes  are  started  in 

turns:

AUTOMATIC

(“AUTO” led: ON)

In this operating mode, the receiver receives a radio signal coded by the chron-

othermostat  via  the  transmitter  interface  and  triggers  the  integral  relay. The 

“POWER ON” led takes on a different colour according to the quality of the 

signal received:

• RED: signal absent or very disturbed

• ORANGE: satisfactory reception

• GREEN: good reception

Fast and brief led flashing indicates the reception of radio data sent by the 

transmitter.

230V50Hz

Содержание CH170D

Страница 1: ...vironmental conditions Do not shield the device with metallic parts Connect cables to the base terminal board according to the wiring diagrams shown Receiver power supply 230 V a c shall be connected to terminals N and L whereas the user pump burner zone valve humidistat etc shall be connected to terminals 1 and 2 N B Several receivers can be connected to one transmitter OPERATION The receiving de...

Страница 2: ...perating mode the receiver receives a radio signal coded by the chron othermostat via the transmitter interface and triggers the integral relay The POWER ON led takes on a different colour according to the quality of the signal received RED signal absent or very disturbed ORANGE satisfactory reception GREEN good reception Fast and brief led flashing indicates the reception of radio data sent by th...

Страница 3: ...ceiver on and then keep the button pressed until selecting the AUTOMATIC MODE see paragraph OPERATION 2 Keep the button pressed for over 10 seconds to start the SELF LEARNING procedure the AUTO led will start flashing 3 Force radio thermostat chronothermostat transmission refer to the relevant user s guide 4 Carry out the OPERATION CHECK procedure to check for correct configu ration of the program...

Страница 4: ... EN60730 1 EN 301 489 3 EN 300 220 3 Power supply 230V 50 Hz Container IP20 Absorbed power 2VA Relay output 5 3 A 250 V Switching contacts voltage free Receiver OOK868 350 MHz Sensitivity 104 dBm Container dimensions 3 modules 17 5 mm per rail EN50022 Degree of pollution 2 Software class A Double insulation Disconnection 1B type Installation type back panel mounting Impulse voltage 4000V 10 sec 23...

Отзывы: