S1
– External switch control for load 1
S2
– External switch control for load 2
Install the In-Wall Smart Switch (Dual).
Important: A licensed electrician with knowledge and understanding electrician systems
and electrical safety should complete the electrical installation.
1. Shut off the main circuit breaker of your home for safety during the installation and ensure the
wires are not short circuited during the installation which will cause damage to the In-Wall
Smart Switch (Dual).
Note: Your home’s main circuit breaker must support the overload protection for safety.
2. Preparing connection wires
14 AWG power wires for Input/ Output.
18 AWG copper wires for external manual switch.
Use the wire stripper cut the metallic part of the connection wire and make sure the length of
the metallic part is about 5mm.
Note: All connection wires needs to be flexible cable.
Wiring diagram of AC120V/230V power input
Содержание FT132
Страница 1: ...In Wall Smart Switch Dual...