Including In-Wall Smart Switch (Dual) as a non-secure device:
If you want your In-Wall Smart Switch (Dual) as a non-secure device in your Z-Wave network,
press the Action Button once on In-Wall Smart Switch (Dual) when you pair it to your gateway. If
inclusion is successful, the green LED will be on for 2 seconds, and then return to a solid
indication. If inclusion is unsuccessful, the red LED will be on for 2 seconds and then return to a
colourful gradient.
Including In-Wall Smart Switch (Dual) as a secure device:
In order to take full advantage of the Smart Film Hub, you will want your In-Wall Smart Switch
(Dual) as a security device that uses encrypted messages to communicate in your Z-wave
network. A security enabled controller/gateway (or Z-Wave Plus controller) is required.
1. Set your Z-Wave Plus controller into pairing mode.
2. Press the Action Button 2 times within 1 second on the In-Wall Smart Switch (Dual), the blue
LED (secure indication) will blink to indicate the In-Wall Smart Switch (Dual) is entering into
secure pairing mode.
3. If the In-Wall Smart Switch (Dual) has been successfully added to your Z-Wave network, its
RGB LED will be solid. If the pairing was unsuccessful, the red LED will be on for 2 seconds
and then remain a colourful gradient, repeat the instructions above from step 1.
Reset your In-Wall Smart Switch (Dual).
If at some stage, your primary controller is missing or inoperable, you may wish to reset all of
your In-Wall Smart Switch (Dual)’s settings to their factory defaults. To do this, press and hold
the Action Button for 20 seconds and then release it. Your In-Wall Smart Switch (Dual) will now
be reset to its original settings, and the green LED will be solid for 2 seconds and then remain the
colourful gradient status as a confirmation.
Technical specifications.
Model number: FT132/FT140
Power input: 120VAC to 240VAC, 50Hz to 60Hz.
Rated output: 5A per channel for resistive load. Total current: Max 10A.
Max standby power: 0.8W.
Operating temperature: 0
to
℃
40
℃
/32
℉
to 104
℉
.
Relative humidity: 20% to 80%.
Operating distance: Up to 492 feet/150 meters outdoors.
Содержание FT132
Страница 1: ...In Wall Smart Switch Dual...