holder over to remove fuse.
d) Risk of fire. Replace fuse only with 5 Amp, 125 Volt fuse.
e) Close fuse cover, Slide closed the fuse access cover on top of attachment plug or push
cover closed so that all tabs latch.
f) Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should
not be removed. Discard product if the attachment plug is damaged.
MAINTENANCE
1. Always remove the plug from the socket-outlet and allow the fan to stop acting before
clean the fan.
2. Clean the external surfaces of the fan with a soft damp (not dripping wet) cloth.
WARNING:
Do not immerse the fan in water.
Do not use any cleaning chemicals such as detergents and abrasives.
Do not allow the interior (special for the PCB) to get wet as this could create a
hazard.
3. When the unit is not in use, make sure that it is unplugged from the wall socket. To store
the fan, you may pack it in the original carton and store it in a cool and dry place until later
use.
4. In case of malfunction or doubt, do not try to repair the fan yourself, it may result in a fire
hazard or electric shock.
