IMPORTANT SAFEGUARDS
When using an electrical appliance, basic safety precautions should always be observed,
including the following:
READ ALL INSTRUCTIONS BEFORE USING
WARNING: To reduce the risk of fire, electrical shock, or injury to
person:
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
1. The product is for household use only.
2. Connect the appliance to single-phase AC supply of the voltage specified on the rating
plate.
3. Never leave the fan unattended while it is in use. Always turn the product to the OFF
position and unplug it from the electrical outlet when not in use.
4. Extreme caution is necessary when any fan is used by or near children, invalids or elderly
person and whenever the fan is left operating and unattended.
5. Do not run cord under carpeting and do not cover cord with throw rugs, runners or the
like. Do not route cord under furniture or appliances. Arrange cord away from traffic area
and where it will not be tripped over.
6. Do not operate the fan with a damaged cord or plug, or after the fan malfunctions, has
been dropped, or damaged in any manner.
7. If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person to avoid a hazard.
8. Use the fan in a well-ventilated area. While using, distance of no less than 20cm should
be kept away from wall or corner to ensure the air intakes or exhaust openings should not
be blocked unexpectedly. The fan must not be located immediately below or besides a
curtain or the likes.
9. Do not insert or allow fingers or any other objects into grill to avoid a mechanical danger
when in use. Do not block air intakes or exhaust openings in any manner.
10. Use the fan on flat, dry floor only.
11.Ensure that the fan is switched off from the supply mains before removing the guard.
12.This product employs overload protection (fuse). A blown fuse indicates an overload or
short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the
fuse as per the user servicing instructions (follow product marking for proper fuse rating)
and check the product. If the replacement fuse blows, a short-circuit may be present and
the product should be discarded or returned to an authorized service facility for
examination and/or repair.
