5
A Variety of Uses
The Fantasea FD-80 housing is more than just an underwater camera system. It protects the D-80 against
damage from such environmental conditions as rain, snow, dust, sand, and dirt. It is perfect protection for
active outdoor sports, where these elements would normally not allow an advanced camera like the D-80
to be used without danger of damage. The lightweight, compact housing and handles make it easy to hold
and use while sailing, fishing, kayaking, backpacking, or just for fun at the beach or around the pool. It
will also provide a valuable tool for many commercial, industrial, and medical applications, because it is
impervious to most liquids, and sprays.
Specifications
The FD-80 is an injection molded polycarbonate housing
The main seal between front and back halves is a Radial O-ring
The ports are sealed when mounted by 2 O-rings, one Radial and one Compression type.
Controls use stainless steel shafts, E-clips and springs
Controls are sealed by double O-rings
Control knobs and buttons are made of molded polycarbonate
Latches are stainless steel
Handles are made of plastic covered aluminium.
Flash sync port is a standard five-pin Nikonos type sync cord connector
The Fantasea FD-80 has a maximum working depth rating of 200' (60m)
Overall Size is 220 x 300 x 230 mm [LxWxH]
Housing weight approximately 2.8 kg
