10
power switch is released, the illuminator will remain active while the exposure meters are
active or until the shutter is released.
Exposure Compensation Control:
Press button and rotate command dial to choose amount of compensation.
Metering Mode:
Press button and rotate command dial to choose Matrix Metering, Center Weighted Metering,
or Spot Metering.
Single/Continuous/Timer/Remote
Control
Shooting mode determines how the camera takes photographs: one at a time, in a continuous
sequence, with a timed shutter-release delay, or with a remote control.
To choose a shooting mode, press the button until the desired setting is displayed.
AF Mode:
Press the AF button until the desired AF setting is displayed: AF-A (auto select), AF-S (Single-
Servo AF) or AF-C (Continuous-Servo AF).
Sub Command Dial:
Rotating dial independently changes Apertures in M or A exposure mode (Or the shutter
speed if working the reverse mode).
Rotating while pushing other control buttons affects the value represented by the control
button
.
Zoom Port Control:
This button activates the zoom lens of the camera.
Attach the Zoom Control Guide Ring to the lens. This is attached using the Velcro strip. Insure
that the projected nub is directly on the bottom.
The camera and tray are inserted in such a way that the nub of the Zoom Control Guide Ring is
sandwiched between the two projections found on the lens port. All are pointed a downward
direction. The Zoom Control is operated when camera is installed in housing is this manner
using button #2
Focus Mode Selector:
Rotate the selector to choose manual focus or auto focus.
When using manual focus, the guide ring should be placed over the focus ring instead of the
zoom ring, in order to control the focus with the zoom port control. In this case there will be no
control over the zoom.
12
11
10
