Page 6
the phone should then have two round plastic holes that can be used to hang your
phone on the wall.
4. Use the two round holes to hang the phone on the wall plate on your wall.
Important Note
: If you do not wish to mount your phone on the wall, the
Wall Mount
Bracket
can be reversed to raise the angle of the phone's display when sitting on a table
or desk.
Adjusting the Display Angle
You can optimize the LCD display by adjusting the viewing angle. To adjust the LCD
viewing angle, move the rear edge of the LCD module up or down.
Adjusting the Display Contrast
The display can be adjusted to suit the light level of your room and your viewing
preference. To make the contrast of the display lighter or darker, press the
◑
button to
the right of the screen until the desired contrast is reached.
Amplify or Volume Reset Override
If you set the
Amplify
switch on the back of phone to
On
, volume reset feature is disabled.
Handset and headset receiver volume level is the same as that of last call.
If the
Amplify
switch is set to
Off
, handset and headset receiver volume level is reset
when phone is on-hook.
Warning:
Possible loud receiver volume when the
Amplify
switch is set to
On
and the
Amplify
LED is lit.
