Page 8
6. This set of volume and frequency specific tone amplification settings are saved
automatically when you replace the handset.
Note: If you adjust volume and/or tone amplification settings during a phone call, the new
settings are saved automatically.
Adjusting Audio Output Volume
You can plug in an external speaker with 3.5 mm plug to amplify receiver volume. Tone
and volume amplification is adjusted with handset receiver volume. In addition, you can
adjust volume on speaker.
Adjusting Speakerphone Receiver Volume
To adjust the speakerphone receiver volume:
1. Press
the
Speaker
button and listen to the dial tone.
2. Press the top side of the
Vol.
button to increase the receiver volume.
3. Press the bottom side of the
Vol.
button to decrease the receiver volume.
4. Press the Speaker button or the Goodbye button when the desired receiver volume is
reached.
Note:
Tone
and
Amp
buttons are used in the handset mode only. They won’t work in the
speakerphone mode.
