background image

 

 

Page 14 

  

10:30am 8/16 #

61WAITING 

480-948-4928 
FANSTEL CORP 

                      #

61

  

    

        48 

   NEW    CALLERS 
   

MESSAGES

 

                         #00 
 

DEL ALL!

 

 
 

Deleting All Calls from the CALLER ID List 

To delete all the calls stored in 

Call Memory

 at once, 

press and hold the 

Delete 

button for 5 seconds.  The 

entire list of calls will be completely cleared and the 
display shows "

DEL ALL!

”. 

 
 

Using Call Waiting CALLER ID 

If another call comes in during a conversation, your phone will display the "WAITING" 
message in the upper right hand corner and the incoming caller's information will be 
displayed on the screen.  To pick up the waiting call: 
1.  Press and release the 

Flash

 button to put the 

current call on "hold" and to answer the incoming 
call.  To switch back and forth between the two calls, 
press and release the 

Flash

 button. 

2.  When a Call Waiting call comes in, you may also hang up the current call in order to 

pick up the waiting call.  The current call will be disconnected and after a temporary 
delay, the phone will ring, allowing you to answer the waiting call. 

 
 

Message Indication 

The 

Message indicator

 flashes to indicate a message(s) is in your local telephone 

company’s voice mailbox, if you subscribe to voice mailbox 
services and your local telephone company delivers a 
"Visual Voice Message Waiting Indication Signal".  
 
When you have messages waiting in your voice mailbox, 
the screen will display “

MESSAGES

” and “

NEW  

CALLERS

” alternatively, and an envelope-shaped 

Voice 

Mail Waiting

 icon " 

 "  will flash. 

 

Accessing Voice Mailbox 

Please follow instructions from your voice mail service provider to access your voice 
mailbox.  
 

Clearing the Message Waiting Indicator 

If you have Voice Messaging service (Voice Mail), whenever you have a new message the 
display will show “

MESSAGES

” and the red light labeled 

Message

 will flash.  After you 

Содержание ST50























Отзывы: