Fanset Fantom Professional PROMAX 800CM2, Руководство пользователя

Страница: 11 / 28

• Unlock the locking latches pulling outwards to the right and left.
• Put the motor bonnet away through holding it from carrying handle.
• The tank should be clean and empty for carpet shampoo function.
Note: Do not put water into your tank for carpet shampoo function.
• Put the motor bonnet back on the tank and lock the latches by pushing
right and left.
• Insert the hose by pushing it into the suction mouth. By pushing the
metal thin water hose to the by-pass adaptor.
• Connect elbow tube with spray trigger to the extension tubes by
pressing in, and extension tubes to each other. (You can operate your
machine without any tubes, too.) Then attach the carpet shampoo nozzle
to the extension tubes.
• Choose your suitable nozzle for the surface you want to clean. Plug the
jack on the nozzle by pushing to the trigger adaptor.
• Fill the shampoo tank with water and add 2-3 scale of shampoo
(non-foaming) in it. Insert the pin of the shampoo drawing pipe to its
connection place on machine by simply pressing.
Note: Always use the original and non-foaming carpet cleaning
shampoo. Otherwise this will damage the pump.
• In carpet cleaning function; connect elbow tube with spray trigger to the
extension tubes by pressing in, and extension tubes to each other. Then
attach the carpet shampoo nozzle to the extension tubes.
• Upholstery Cleaning function; insert the upholstery shampoo nozzle
directly to elbow tube with spray trigger. Insert the tip end of the
upholstery shampoo nozzle into the juction on the elbow tube with
spray trigger.
• Plug-in your machine’s cable to the power socket.
• Turn on the on-off switch to operate the device.
• Turn on the switch for shampoo delivery pump.
• Pull the trigger to spray the shampoo water on the floors you want clean.
Then stop pulling the trigger after spraying enough water. This will end
water spraying.
• When the dirty water has reached the highest permitted level in the
tank, buoy automatically blocks the suction. You should empty the dirty
water out of the tank.
• Certainly turn off the pump switch when water with shampoo is finished.
• Turn off the pump switch when it is not needed.
ASSEMBLY FOR CARPET SHAMPOO FUNCTION EN
• Unlock the locking latches pulling outwards to the right and left.
• Put the motor bonnet away through holding it from carrying handle.
• The tank should be clean and empty when using wet vacuuming
function.
Note: Do not put water into your tank for wet vacuuming function.
• Put the motor bonnet back on the tank and lock the latches by pushing
right and left.
• Insert the hose by pushing it into the suction mouth.
• Plug the attached tubes to the hose handle. Instead of using two
extension tubes, you can use your machine with only one tube or without
any extension tube by connecting accessories directly to the hose
handle.
• Plug-in your machine’s cable to the power socket.
• Operate your machine by using ON-OFF switch.
Note: Turn off the pump switch for wet vacuuming function.
• When the fluid has reached the highest permitted level in the tank, buoy
automatically blocks the suction and the motor gets noisier. In this case,
switch off the machine immediately, pull the plug and remove the motor
bonnet from the tank. Empty the tank and then restart your machine.
• If the place is so deep for wet vacuuming function, do not dip all of the
accessory so as not to block air circulation. If the liquid is on a smooth
area, use wet vacuuming function with your suitable accessory by
moving forward and back.
• Unlock the locking latches pulling outwards to the right and left.
• Put the motor bonnet away through holding it from carrying handle.
• Insert the dust bags ın the tank
• Make sure that dustbags are plugged in dry vacuuming function.
• Put the motor bonnet back on the tank and lock the latches.
• Insert the hose by pushing it into the suction mouth.
• Plug the attached tubes to the hose handle. Instead of using two
extension tubes, you can use your machine with only one tube or without
any extension tube by connecting accessories directly to the hose
handle.
• Plug-in your machine’s cable to the power socket.
• Operate your machine by using ON-OFF switch.
• By moving forward and back your suitable accessory for the surface you
want to clean, make dry vacuuming function.