Fanset Fantom Professional PROMAX 800CM2, Руководство пользователя

Страница: 10 / 28

• Unlock the locking latches pulling outwards to the right and left.
• Put the motor bonnet away through holding it from carrying handle.
• The tank should be clean and empty when using wet vacuuming
function.
Note: Do not put water into your tank for wet vacuuming function.
• Put the motor bonnet back on the tank and lock the latches by pushing
right and left.
• Insert the hose by pushing it into the suction mouth.
• Plug the attached tubes to the hose handle. Instead of using two
extension tubes, you can use your machine with only one tube or without
any extension tube by connecting accessories directly to the hose
handle.
• Plug-in your machine’s cable to the power socket.
• Operate your machine by using ON-OFF switch.
Note: Turn off the pump switch for wet vacuuming function.
• When the fluid has reached the highest permitted level in the tank, buoy
automatically blocks the suction and the motor gets noisier. In this case,
switch off the machine immediately, pull the plug and remove the motor
bonnet from the tank. Empty the tank and then restart your machine.
• If the place is so deep for wet vacuuming function, do not dip all of the
accessory so as not to block air circulation. If the liquid is on a smooth
area, use wet vacuuming function with your suitable accessory by
moving forward and back.
• Unlock the locking latches pulling outwards to the right and left.
• Put the motor bonnet away through holding it from carrying handle.
• Insert the dust bags ın the tank
• Make sure that dustbags are plugged in dry vacuuming function.
• Put the motor bonnet back on the tank and lock the latches.
• Insert the hose by pushing it into the suction mouth.
• Plug the attached tubes to the hose handle. Instead of using two
extension tubes, you can use your machine with only one tube or without
any extension tube by connecting accessories directly to the hose
handle.
• Plug-in your machine’s cable to the power socket.
• Operate your machine by using ON-OFF switch.
• By moving forward and back your suitable accessory for the surface you
want to clean, make dry vacuuming function.
ASSEMBLY FOR DRY VACUUMING FUNCTION EN
ASSEMBLY FOR WET VACUUMING FUNCTION