www.fanox.com
Installation_Guide_SIAB110FC232AC_Rev. 01
22 / 36
7.3.2. States menu
How to configure LED
’s
States menu indicates the stuses of the relay (activated or
deactivated) at real time.
From the standby mode screen, press the “OK” key to access
the first line of menus.
Use the
“▲” and “▼” keys to position the cursor over the
“STATES” screen and press “OK”. This takes you to the
status grou
ps’ line.
Move the cursor over a group of statuses and
press the “OK”
key to access the statuses that belong to this group. Use the
“▲” and “▼” keys to browse through the different statuses.
The information shows if each status is active. The message
“>Activated” appears under the name of the group in the
status group menus if any of the statuses in that group are
active.
Press the “C” key to return to the standby mode screen.
Pre
ssing “OK” key from the standby screen it is displayed MEASUREMENT menu. Use “▼” key
till STATES
menu appears. Pressing “OK” key it is accessed to states. Use “▼” key to overview
the states
and press “OK” when the desired option appears. Use “►” key to assign that state to
a LED. After insering the password, It will be possible to assign the selected state to the
configuration.
