DNA
TM
System Instruction Manual
D00981262
Revision A, May 2015
37
5.6
Starting a Test
•
To start a test begin by clicking on the start button on the lower
left of the active window
•
The test setup box will appear.
On the left side of the box are fields for entering in data relative to the test. Fields
identified with a blue asterisk must be filled in before a test can be run. The center
section is where the desired profile/profiles can be selected by clicking on the
folder icon and selecting from the previously saved profiles. The right section
allows the user to set the temperature tolerance, settle time, and to start the selected
tests.
If multiple profiles are selected, they will be run in order from top
to bottom. The next profile in order will begin immediately after
the previous profile has been concluded.
