12
2.
Slide the receiver into the hanger bracket before
wiring as shown in figure 3.
Hanger Bracket
Receiver
NOTE:
Supply wires
omitted for clarity.
Figure 3
How to Wire Your Ceiling Fan
Main Fuse Box
Figure 2
NOTE:
The remote unit has 32 different code
combinations. To prevent possible interference from
or to other remote units, simply change the
combination code in the remote and receiver.
NOTE:
If you are not sure if the outlet box is grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.
CAUTION:
INCORRECT WIRE CONNECTION WILL
DAMAGE THIS RECEIVER.
1.
To set the code on receiver unit, slide dip switches
to the same positions as set on the remote. (Figure 1)
NOTE:
Factory setting is all up. Do not use this
position.
Figure 1
Dip Switch
Receiver
Remote Control
ON DIP
1
2
3
4
5
WARNING
To avoid possible electrical shock, be sure electricity
is turned off at the main fuse box before wiring.
(Figure 2)