Light Plate
Assembly
LED Assembly
Figure 5
2.
Assemble the light plage assembly to the motor
assembly support bracket using the two key slots
in the light plate assembly. Replace the previously
removed screw and securely tighten all three screws.
(Figure 2)
5.
Assemble the LED assembly to the light plate
assembly using the two key slots and replace the
third screw and securely tighten all three screws.
(Figure 5 )
How to Assemble the Light Kit
10
LED Assembly
Figure 4
Motor
Assembly
Light Plate Assembly
Figure 2
Motor
Assembly
3.
Remove one of the three screws in the light
plate assembly and retain the screw for later.
Slightly loosen the remaining two screws. (Figure 3)
Light Plate
Assembly
Figure 3
Motor Assembly
Figure 1
4.
Connect the 2 single-pin connectors from the
LED assembly to the 2 single-pin connectors from
motor assembly. (Figure 4 )
The light source is designed for this specific
application and can overheat if serviced by untrained
personnel. If any servicing is required, the product
should be returned to an authorized service facility
for examination or repair.
CAUTION
1.
Remove one of the three screws in the support
bracket at the bottom of the motor assembly and
retain the screw for later. Slightly loosen the
remaining two screws. (Figure 1)
To Reduce The Risk Of Electric Shock, Disconnect
The Electrical Supply Circuit To The Fan Before
Installing Light Kit.
CAUTION
