13
How to Assemble Your Ceiling Fan Blades (Continued)
2.
Secure the blade cover to the hub of motor
assembly using 3/16˝-24 flat head screw. (Figure 2)
Figure 2
Figure 1
x 18
3/16
”
-24
Flat Head Screw
HARDWARE USED:
Motor Assembly
Blade Cover
3/16˝-24
Flat Head Screw
(2 each per
blade cover)
Motor
Assembly
How to Assemble Your Light Kit
1.
Remove one of the three screws in the support
bracket at the bottom of the motor assembly. Retain
the screw for later and slightly loosen the remaining
two screws. (Figure 1)
CAUTION
To reduce the risk of electric shock, disconnect the
electrical supply circuit to the fan before installing
your light kit.
2.
Assemble the switch housing assembly to the
support bracket using the two key slots in the switch
housing assembly. Replace the previously removed
screw and securely tighten all three screws.
(Figure 2)
Figure 2
3.
Remove one of the three screws in the switch
housing assembly. Retain the screw for later and
slightly loosen the remaining two screws. (Figure 3)
Figure 3
Switch Housing
Assembly
Switch Housing
Assembly