13
4.
If airflow is desired in the opposite direction, turn
the fan off and wait for the blades to stop turning.
Then slide the reverse switch to the opposite position
and turn fan on again. The operating sequence is as
follows: (Figure 29)
Maintenance
1.
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.When cleaning, use
only a soft brush or lint free cloth to avoid scratching
the finish. Abrasive cleaning agents are not required
and should be avoided to prevent damage to finish.
Do not use water when cleaning your ceiling fan.
It could damage the motor or the finish and create
the possibility of electrical shock.
CAUTION
Periodic light dusting of the blades is recommended.
A feather duster will work best.
Blade Cleaning
Avoid using water, cleansers, or harsh rags, which
can warp and ruin the finish.
Reverse Switch Information
Season
Rotation Direction
Switch Position
Summer
Counter-Clockwise
Left
Winter
Clockwise
Right
How to Operate Your Ceiling Fan
(continued)
Reversing
Switch
3.
The 5-button hand-held remote transmitter includes
five buttons for high, medium and low fan speeds
as well as fan off and light on/off. Infinite light levels
are available by holding the light on/off button
(Figure 28).
Figure 27
REMOTE
3V, CR2032
BATTERY
(2 PCS)
CONTROL
Figure 28
Figure 29
5-BUTTON
REMOTE
CONTROL
2.
To make fan operational ,install two 3-volt batteries
into the hand-held remote transmitter, (if not using for
long periods of time, remove battery to prevent
damage to transmitter). Store the remote away from
excessive heat or humidly (Figure 27).